advertise

RFID Antenna; MS-910M-L -12

RFID Antenna type code: MS-910M-L -12

RFID, which stands for radio frequency identification, is a form of wireless communication that uses radio waves to identify and track objects. RFID antennas perform two very important functions. First, they transmit power to the RFID tags by activating them, and second, they receive data back from the activated tags. A single antenna can activate and receive data from multiple tags simultaneously. The antennas are connected to the RFID reader using a coaxial cable. The antennas have no intelligence and are completely controlled by the RFID reader.

Antenna type code:

"MS-910M-L -12" specifications:

“MS-910M-L-12” is a Linear polarized microstrip antenna operating within 860-960 MHz, gain around 12dB, and presents an excellent s11 result.

UHF RFID Antenna:

"MS-910M-L -12" is an ultra-high-frequency (UHF) RFID Antenna that boasts a frequency range of 860-960 MHz.
The UHF frequency band generally covers the range from 300 MHz to 3 GHz.
RFID systems that operate in this frequency band are called Ultra High Frequency (UHF) RFID Systems.
In the US, the UHF RFID systems are allocated a frequency range of from 902 to 928 MHz, but in Europe, UHF RFID systems are assigned a frequency range of 865 to 868 MHz.
Our design is suitable for both and even other allocated ranges within 860-960 MHz.
The read range of passive UHF systems can be as long as 12 m, and UHF RFID has a faster data transfer rate than LF or HF.


Antenna Gain:

Antenna gain indicates the ability of the antenna to send or receive a signal more or less in a specified direction. In a transmitting antenna, the gain describes how well the antenna converts input power into radio waves headed in a specified direction. In a receiving antenna, the gain describes how well the antenna converts radio waves arriving from a specified direction into electrical power.
“MS-910M-L-12” Average gain is 12dB.


RFID Antenna; antenna type code: MS-910M-l-12

S-parameters:

S-parameters describe the input-output relationship between ports (or terminals) in an electrical system.
In practice, the most commonly quoted parameter in regards to antennas is S11.
S11 represents how much power is reflected from the antenna, and hence is known as the reflection coefficient. If S11=0 dB, then all the power is reflected from the antenna and nothing is radiated. If S11=-10 dB, this implies that if 3 dB of power is delivered to the antenna, -7 dB is the reflected power. 
the maximum acceptable value of S11 for an interconnect structure is about -13 dB: If S11 is smaller than -13 dB, we will not see the impact from these reflections on the transmitted signal.
“MS-910M-L -12” presents a good s11 result as shown below.

RFID Antenna; antenna type code: MS-910M-l-12

Circularly polarized antenna:

while the signal travels from the transmitter to the receiver, circular polarization of an electromagnetic wave is a polarization state in which, at each point, the electromagnetic field of the wave has a constant magnitude and is rotating at a constant rate in a plane perpendicular to the direction of the wave.
"MS-910M-L -12" is a Right Hand Circular Polarization (RHCP). 


RFID Antenna; antenna type code: MS-910M-l-12

What is Antenna Polarization, and Why Does it Matter?

RFID Antenna, MS-910M-L -12 type, Feeding:


The Coaxial feed or probe feed is one of the most common feeding ways for microstrip patch antennas.
"MS-910M-L -12" is designed to be fed with coaxial cables and RF connectors.
RG58, RG316, RG223, RG213 coaxial cables, and SMA and N-Type connectors are mostly recommended for this microstrip antenna.
We will tell you the exact cable and connector type base on your demand.



RFID Antenna - MS-910M-L -12 - performance:

Why buy RFID Antenna -MS-910M-L -12- type?

"MS-910M-L-12" operates in a wide range of frequencies and has a high gain compared to the microstrip structure.
"MS-910M-l-12" also has small dimensions that turn This microstrip antenna into a useful antenna.

OUR GUARANTEE

With a bit of search, you will find out that our antennas are competitively priced. 10ANTENNA is looking for the best possible design and the lowest cost for your product. we receive all your demands, design it and we are by your side to answer all your questions.

Over 10 Years Experience

10 Antenna, LTD is the exclusive developer and manufacturer of waveguides and RF antennas for demanding applications such as public safety, wireless broadband systems, WiFi, WiMax, video monitoring systems, 3G, CDMA, GSM, PCS, and LTE.

Fill out this form to get in touch.


Waveguides and RF Antennas

10ANTENNA is the exclusive designer of waveguides and RF antennas for demanding applications such as public safety, wireless broadband systems, WiFi, WiMax, video monitoring systems, 3G, CDMA, GSM, PCS, and LTE.